Responsive Image Banner

References: Surge Force

Premium Content

January 18, 2018

References

  1. Brun, K. and Kurz, R., 2010, “Analysis of the Effects of Pulsations on the Operational Stability of Centrifugal Compressors in Mixed Reciprocating and Centrifugal Compressor Stations.” Journal of Engineering for Gas Turbines and Power, vol. 132, n 7.
  2. Brun, K., Nored, M., and Kurz, R., 2014, “Impact of the Piping Impedance and Acoustic Characteristics on Centrifugal Compressor Surge and Operating Range.” ASME Paper No. 2014-2504.
  3. Brun, K. and Nored, M., 2008, “Application Guidelines for Surge Control System.” Gas Machinery Research Council Publication.
  4. Greitzer, E. M., “Surge and Rotating Stall in Axial Flow Compressors – Part I: Theoretical Compression System Model.” ASME Journal, Journal of Engineering for Power, 1976, pp. 190-198.
  5. Greitzer, E. M., “Surge and Rotating Stall in Axial Flow Compressors – Part II: Experimental Results and Comparison with Theory.” ASME Journal, Journal of Engineering for Power, 1976, pp. 199-217.
  6. Hansen, K. E., Jorgensen, P., Larsen, P. S., “Experimental and Theoretical Study of Surge in a Small Centrifugal Compressor.” ASME Journal, Journal of Fluids Engineering, Vol. 103, 1981, pp. 391-395.
  7. Botros, K. K., “Transient Phenomena in Compressor Stations During Surge.” ASME Journal, Journal of Engineering for Gas Turbines and Power, Vol. 116, 1994, pp. 133-142.
  8. Yoon, S. Y., Lin, Z., Goyne, C., Allaire, P., “An Enhanced Greitzer Compressor Model Including Pipeline Dynamics and Surge.” ASME Journal, Journal of Vibration and Acoustics, Vol. 133, 2011, pp. 051005-1-051055-14.
  9. Hiradate, K., Sakamoto, K., Shinkawa, Y., Joukou, S., Uchiyama, T., “Investigation on Pressure Fluctuation Related to Mild Surge in Multi-Stage Centrifugal Blower with Inlet Guide Vane.” ASME Paper GT2015-43034.
  10. Dumas, M., Vo, H. D., Yu, H., “Post-Surge Load Prediction for Multi-Stage Compressors Via CFD Simulations.” ASME Paper GT2015-42748.
  11. Belardini, E., Rubino, D.T., Tapinassi, L., Pelella, M., “Modeling of Pressure Dynamics During Surge and ESD.” 3rd Middle East Turbomachinery Symposium, Doha, Qatar, February 15-18, 2015.
  12. Biliotti, D., Toni, L., Belardini, E., Vannini, G., Giachi, M., Rubino, T.D., “Stall Induced Aerodynamic Forcing and Rotor Vibrations in a Multistage Centrifugal Compressor.” 3rd Middle East Turbomachinery Symposium, Doha, Qatar, February 15-18, 2015.
  13. Baldanzini, F., Calosi, M., Belardini, E., Pelella, M., Rubino, T. D., Tapinassi, L., “HPRC Prototype Surge Exploration Tests and Second Quadrant Characteristic Dynamic Modeling.” 45th Turbomachinery & 32nd Pump Symposium, Houston, Texas, September 12-15, 2016.
  14. Sparks, C. R., 1983, “On the Transient Interaction of Centrifugal Compressors and Their Piping Systems.” ASME 83-GT-236.
  15. Aust, N., 1988, “Ein Verfahren zur digitalen Simulation instationaerer Vorgaenge in Verdichteranlagen.” Diss U Bw, Hamburg.
  16. Morini, M., Pinelli, M., Venturini, M., 2006, “Development of a One-Dimensional Modular Dynamic Model for the Simulation of Surge in Compression Systems.” ASME Transactions, Journal of Turbomachinery, 129 (3), pp. 437-447.
  17. Shapiro, L. 1996, “Performance Formulas for Centrifugal Compressors.” Solar Turbines Publication.
  18. Wachter, J., Loehle, M., 1985, “Identifikation des dynamischen Uebertragungsverhaltens eines dreistufigen Radialverdichters bei saug- und druckseitiger Durchsatzvariation.” VDI Bericht 572.2, pp. 365-379.
  19. Moore, J.J., Ransom, D.L., Viana, F. “Rotordynamic force of centrifugal compressor impellers using computational fluid dynamics.” J. Eng. Gas Turbines Power, 133(4), 2010, doi:10.1115/1.2900958.
  20. Munari, E., Morini, M., Pinelli, M., Spina, P.R. Experimental Investigation and Modeling of Surge in a Multistage Compressor. Submitted to the 8th international conference on Applied Energy (ICAE 2016).
  21. Fink, D.A., Cumpsty, N.A., Greitzer, E.M. “Surge Dynamics in a Free-spool Centrifugal Compressor System.” J. Turbomach 114(2), 321-332, 1992, doi:10.1115/1.2929146.
  22. Japikse, D. “Centrifugal compressor design and performance (Book).” Wilder, VT: Concepts ETI, Inc., 1996, (1996).
MAGAZINE
NEWSLETTER
Delivered directly to your inbox, CompressorTech² News features the pick of the breaking news stories, product launches, show reports and more from KHL's world-class editorial team.
Latest News
Everllence technology selected for Stockholm Exergi’s large-scale BECCS project
Former MAN Energy Solutions unit to supply compressor and expander train for carbon removal facility
Wison New Energies and Siemens Energy sign MoU on floating LNG cooperation
Agreement focuses on turbine and compressor packages to streamline offshore project development
TotalEnergies, partners reach FID on fourth train at Rio Grande LNG
Final investment decision will expand South Texas export terminal to 24 mtpa by 2030
CONNECT WITH THE TEAM
Jack Burke Senior Editor Tel: +1 262 527 0815 E-mail: [email protected]
Gabriele Dinsel Brand Manager Tel: +49 711 34 06 73 50 E-mail: [email protected]
Kristin Pride USA Sales Representative Tel: +1 720 298 8546 E-mail: [email protected]
CONNECT WITH SOCIAL MEDIA

WEBINAR: Carbon Capture and Storage

COMPRESSORTech² is giving you a front-row seat to the technologies making CCS work today. Join Baker Hughes and Caterpillar as they share hands-on case studies and deployment insights—from CO₂ compression and pipeline transport to secure underground storage.

📅 December 4 2025

I want to attend!