Edit ModuleShow Tags

CDM Passes 1.2 Million Hp Mark

Most of growth occurred in Permian Basin


Published:

CDM Resource Management LLC’s contract compression fleet passed the 1 million hp (745 MW) level late last year and since has grown to 1.2 million hp (895 MW).

For more than 16 years, CDM has provided contract compression services to producers in major shale plays and offshore areas with a Caterpillar gas engine/Ariel compressor packaged fleet ranging from 50 hp (37 kw) to 4775 hp (3561 kw).

Much of the recent growth has been in the rapidly developing Permian Basin, where CDM’s contracted fleet has increased more than 165,000 hp (123 MW) in the past two years. The company anticipates a similar growth rate in 2014 based on forecasts of customer compression needs in the area.

Houston-based CDM gives its customers a 98% runtime guarantee. It also ensures that customers are provided equipment that is sized right for the facility and optimized for production and fuel efficient operation.

Edit ModuleShow Tags

Archive »Archive »

Opcon Selling Compressor, Waste Heat Business

Opcon AB, the energy and environmental technology group, has signed a Memorandum of Understanding (MoU) to sell part of its compressor technology and waste heat recovery business.

St. Clair Compressor Station Gets Upgrade

Consumers Energy is looking to improve the St. Clair Compressor Station, Ira Township, Michigan, with a US$165 million upgrade.

Capstone Microturbines To Power Two New Shale Compressor Stations

Capstone Turbine received orders from E-Finity Distributed Generation for microturbines to be used for oil and gas operations in the Marcellus and Utica Shale regions.

DCL Nets PICA As New Distributor

DCL America Inc. has added a new distributor for its Northeastern United States - Power Ignition and Controls Appalachia (PICA).

Caterpillar Releases Valves, Seats For Pressure Pumping Customers

Caterpillar has released its Cat valves and seats for well stimulation pump fluid ends. Cat 4- and 5-series valves and seats are designed to maximize interchangeability across the Cat well stimulation fluid end line and be dimensionally compatible with industry standard fluid ends in the 2000 to 3000 hp (1491 to 2237 kW) range. Fluid end valves and seats are highly-consumed parts in well stimulation operations and, as a result, are frequently replaced. Historically, Caterpillar uses valves and seats obtained from alternate sources. Caterpillar’s new fluid end valves and seats provide decreased wear and extended life to pressure pumping customers, the company said. The material life of the fluid ends is extended by optimizing the geometry of the Cat valve and seat, increasing the contact area and improving the distribution of forces, resulting in reduced material fatigue, Cat said. The flow area is increased by balancing the pressure drop across the Cat valves, reducing flow restrictions and the potential for cavitation. Additionally, impact forces are reduced as the contact area between valve and seat has nearly doubled from previous designs. Caterpillar manufacturers a line of pressure pumps with maximum inputs ranging from 600 to 3000 bhp (447 to 2237 kW). The new valves and seats can be ordered from the global Cat dealer network.