Edit ModuleShow Tags

Carrizo Oil & Gas Inc. Begins Production from the Beachhouse #2 Well


Carrizo Oil & Gas Inc. announced that the its Beachhouse #2 well in Chambers County, Texas, has commenced production. The 12,350 ft. follow-up exploratory well is currently producing to sales from the Vicksburg interval at an estimated rate of 8040 Mcf of natural gas and 603 barrels of oil (11,658 Mcfe) per day with a flowing tubing pressure of 7200 psi. Carrizo is the operator of the well and owns an approximate 25 percent working interest.

Carrizo also has successfully recompleted the Delta Farms #1 well in LaFourche Parish, Louisiana. The well was recompleted in the upper Cris I sand at approximately 14,200 ft and is currently producing to sales at an estimated rate of 3,435 Mcf of natural gas and 795 barrels of oil (8,205 Mcfe) per day with a flowing tubing pressure of 9,500 psi. Carrizo is the operator of the well and owns an approximate 40 percent working interest.

Edit ModuleShow Tags

Archive »Recent Articles

Opcon Selling Compressor, Waste Heat Business

Opcon AB, the energy and environmental technology group, has signed a Memorandum of Understanding (MoU) to sell part of its compressor technology and waste heat recovery business.

St. Clair Compressor Station Gets Upgrade

Consumers Energy is looking to improve the St. Clair Compressor Station, Ira Township, Michigan, with a US$165 million upgrade.

Capstone Microturbines To Power Two New Shale Compressor Stations

Capstone Turbine received orders from E-Finity Distributed Generation for microturbines to be used for oil and gas operations in the Marcellus and Utica Shale regions.

DCL Nets PICA As New Distributor

DCL America Inc. has added a new distributor for its Northeastern United States - Power Ignition and Controls Appalachia (PICA).

Caterpillar Releases Valves, Seats For Pressure Pumping Customers

Caterpillar has released its Cat valves and seats for well stimulation pump fluid ends. Cat 4- and 5-series valves and seats are designed to maximize interchangeability across the Cat well stimulation fluid end line and be dimensionally compatible with industry standard fluid ends in the 2000 to 3000 hp (1491 to 2237 kW) range. Fluid end valves and seats are highly-consumed parts in well stimulation operations and, as a result, are frequently replaced. Historically, Caterpillar uses valves and seats obtained from alternate sources. Caterpillar’s new fluid end valves and seats provide decreased wear and extended life to pressure pumping customers, the company said. The material life of the fluid ends is extended by optimizing the geometry of the Cat valve and seat, increasing the contact area and improving the distribution of forces, resulting in reduced material fatigue, Cat said. The flow area is increased by balancing the pressure drop across the Cat valves, reducing flow restrictions and the potential for cavitation. Additionally, impact forces are reduced as the contact area between valve and seat has nearly doubled from previous designs. Caterpillar manufacturers a line of pressure pumps with maximum inputs ranging from 600 to 3000 bhp (447 to 2237 kW). The new valves and seats can be ordered from the global Cat dealer network.