Edit ModuleShow Tags

Rolls Wood Upgrades 100th Avon 200


Published:

Rolls Wood Group (RWG), a joint venture between Rolls-Royce plc and Wood Group, has completed its 100th upgrade of a Rolls-Royce Avon 200 industrial gas turbine. It will be sent to an offshore production platform in Asia.

The Avon industrial gas turbine delivers up to 22,000 hp (15 MW) of power operating in a wide range of power generation and oil and gas applications. More than 1200 units have been sold and operating experience exceeds 64 million hours.

With a redesigned turbine introduced in 2007, the upgraded Avon 200 delivers up to 22,800 hp (17 MW), improved thermal efficiency and emissions improvements.

Members of the RWG Board visited the company’s remanufacturing facility in Dyce, Scotland, to observe the milestone event. Rolls Wood Group was established in 1990 to repair and overhaul Rolls-Royce industrial turbines including the Avon, Olympus and RB211.

 

Edit ModuleShow Tags

Archive »Recent Articles

Opcon Selling Compressor, Waste Heat Business

Opcon AB, the energy and environmental technology group, has signed a Memorandum of Understanding (MoU) to sell part of its compressor technology and waste heat recovery business.

St. Clair Compressor Station Gets Upgrade

Consumers Energy is looking to improve the St. Clair Compressor Station, Ira Township, Michigan, with a US$165 million upgrade.

Capstone Microturbines To Power Two New Shale Compressor Stations

Capstone Turbine received orders from E-Finity Distributed Generation for microturbines to be used for oil and gas operations in the Marcellus and Utica Shale regions.

DCL Nets PICA As New Distributor

DCL America Inc. has added a new distributor for its Northeastern United States - Power Ignition and Controls Appalachia (PICA).

Caterpillar Releases Valves, Seats For Pressure Pumping Customers

Caterpillar has released its Cat valves and seats for well stimulation pump fluid ends. Cat 4- and 5-series valves and seats are designed to maximize interchangeability across the Cat well stimulation fluid end line and be dimensionally compatible with industry standard fluid ends in the 2000 to 3000 hp (1491 to 2237 kW) range. Fluid end valves and seats are highly-consumed parts in well stimulation operations and, as a result, are frequently replaced. Historically, Caterpillar uses valves and seats obtained from alternate sources. Caterpillar’s new fluid end valves and seats provide decreased wear and extended life to pressure pumping customers, the company said. The material life of the fluid ends is extended by optimizing the geometry of the Cat valve and seat, increasing the contact area and improving the distribution of forces, resulting in reduced material fatigue, Cat said. The flow area is increased by balancing the pressure drop across the Cat valves, reducing flow restrictions and the potential for cavitation. Additionally, impact forces are reduced as the contact area between valve and seat has nearly doubled from previous designs. Caterpillar manufacturers a line of pressure pumps with maximum inputs ranging from 600 to 3000 bhp (447 to 2237 kW). The new valves and seats can be ordered from the global Cat dealer network.